Mean well 24V 100A 2400W power supply Meanwell RSP-2400-24-M30

Power Supply RSP-2400-24 24V Mean Well - M16-M30

Rp 7.000.000 Rp 6.800.000

Berat: 1,00 kg

Availability: In Stock

Deskripsi

Mean well 24V 100A 2400W power supply Meanwell RSP-2400-24

100A power supply RSP-2400-24 Features:

Meanwell Transformer

AC input 180 ~ 264VAC
AC input active surge current limiting
High efficiency up to 91%
Built-in active PFC function, PF>0.95
Protections: Short circuit / Overload / Over voltage / Over temperature / Fan alarm
Output voltage can be trimmed between 20 ~ 110% of the rated output voltage

Forced air cooling by built-in DC Fan with fan
High power density 12.5w/inch
Current sharing up to 3 units
Alarm signal output (ralay contact and TTL singal)
Built-in 12V/0.1A auxiliary output for remote control
Built-in remote ON-OFF control
Built-in remote sense function
2 years warranty

24V output Meanwell RSP-2400-24 Safty Approval:

cUL, TUV, CB, CE Approved

2400W Mean well RSP-2400-24 specification:

Model No.		RSP-2400-24
OUTPUT	DC VOLTAGE	24V
	RATED CURRENT	100A
	CURRENT RANGE	0 ~ 100A
	RATED POWER	2400W
	RIPPLE & NOISE (max.) Note.2	150mVP-P
	VOLTAGEADJ.RANGE	22 ~ 28V
	VOLTAGE TOLERANCE Note.3	±1.0%
	LINEREGULATION	±0.5%
	LOADREGULATION	±0.5%
	SETUP.RISEHOLD.TIME	1000ms, 80ms at full load
	HOLD TIME(TYP.)	10ms at full load
INPUT	VOLTAGERANGE	180~264VAC 254~370VDC
	FREQUENCYRANGE	47~63HZ
	POWER FACTOR (Typ.)	0.95/230VAC at full load
	EFFICIENCY (Typ.)	90.5%
	AC CURRENT (Typ.)	15.5A/180VAC 12A/230VAC
	INRUSH CURRENT (Typ.)	60A/230VAC
	LEAKAGECURRENT	<2.0mA/240VAC
PROTECTION	OVERLOAD	100~110%rated output power
	OVERLOAD	User adjustable continuous constant current limiting or constant current limiting with delay shutdown after 5 seconds, re-power on to recover
	OVER VOLTAGE	28.8 ~ 33.6V
	OVER VOLTAGE	Protection type : Shut down o/p voltage, re-power on to recover
	OVER TEMPERATURE	Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION	AUXILIARY POWER(AUX)	12V @ 0.1A (Ohly for Remote ON/OFF control)
	REMOTE ON/OFF CONTROL	Please refer to function manual
	ALATPW SIGNAL OUTPOL	Please refer to function manual
	OUTPUT VOLTAGE TRIM	9.6 ~ 56V
	CURRENT SHARING	Please refer to function manual
ENVIRONMENT	WORKING TEMP	-20 ~ +70°C (refer to output load derating curve)
	WORKINGHUMIDITY	20~90% RH non-condensing
	STORAGE TEMP HUMIDITY	-40~+85°C 10~95%RH
	TEMPCOEFFICIENT	±0.05%/°C (0~50°C )
	VIBRATION	10~500HZ, 2G10min/1cycle, 60 min each along X, Y, Z axes
SAFETY&EMC	SAFETY STANDARDS	UL60950-1, TUV EN60950-1 approoved
	WITHSTAND VOLTAGE	1/P-0/P:3KVAC 1/P-FG:1.5KVAC 0/P-FG:0.5KVAC
	ISOLATIONRESISTANCE	1/P-0/P,1/P-FG,0/P-FG:100M Ohms/500VDC/25 °C /70%RH
	EMC EMMISION	Compliance to EN55022(CISPR22) Class B, EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, ,light industry level, criteria A
QTHERS	MTBF	106.7Khrs min MIL-HDBK-217F(25 °C )
	DIMENSION	278177.863.5mm(LWH)
	PACKING	3.3Kg 4pcs / 14.2Kg / 1.89CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 °C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.